Expert Answers about Truck Bed Accessories

• Could Pace Edwards JackRabbit Tonneau Allow Install of Truck Bed Accessories
• The Pace Edwards JackRabbit Retractable Hard Tonneau Cover # PE54FR that you referenced does install between the truck bed rails and gives quite a bit of access to the stake pockets of them so it would fit some accessories that mount to the truck bed as long as they attach to the stake pockets or top of bed rail and do not wrap around the inside of the bed rail.
  view full answer...


• Recommended Truck Bed Bike Rack for 2017 GMC Canyon
• The Swagman Impakt Bike Rack # S62FR referenced in your question is confirmed to work well on your 2017 GMC Canyon. The fork block can install onto accessory rails like what you see in the demonstration video you mentioned, but it is also designed to bolt onto any flat surface with the included hardware. The accessory rails are simply factory components on the truck in the video, but they are not necessary for proper installation of this product. This will work just fine with the bed liner...
  view full answer...


• Will Yakima HullRaiser Kayak Carrier Fit Erickson Truck Bed Ladder Rack Crossbars On 2009 Ford F-150
• The crossbar dimension for the Erickson Truck Bed Ladder Rack, part # EM07706 measures 1.8 inches diameter. The Yakima HullRaiser, part Y04039 is designed to fit round crossbars up to 1-1/8 inches diameter, and would not fit the # EM07706 crossbars. I recommend a ladder rack like the Yakima Outdoorsman 300 Ladder Rack, part # Y01136-Y00410. The uprights on this ladder rack clamp onto the bed rails of your truck and accept the Yakima accessories like the HullRaiser.
  view full answer...


• Could Classic Accessories Truck Bed Camper Cover Fit Lance Camper
• If you check out the picture I attached you'll see where to measure to determine if the Classic Accessories Deluxe PolyPro III Heavy-Duty Truck Bed Camper Cover # CA80037 will fit your camper. If the particular Lance camper you have is between 10 and 12 feet this would work great. I attached a link to a page that has all of the truck campers we carry as well if you have a different size.
  view full answer...


• Drain Covers for Ford Branded Accessory Truck Bed Cover
• The Replacement Drain Valves for BAKFlip Truck Bed Tonneau Covers - Qty 2 # PARTS-356A0011 should be exactly the same as your Ford OEM cover. BAK industries does make the Ford OEM cover from what I can find online, so that is the part you want. If you also need the rain tubes, you will want # PARTS-316A0006.
  view full answer...


• Replacement Hardware and Mounts for Yakima Overhaul HD Rack
• The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack Uprights - Aluminum - 500 lbs # Y01151 or the Yakima OverHaul HD Truck Bed Rack Uprights with Tonneau Kit - Aluminum - 300 lbs # YA24FR are the only replacement parts if that is what you are seeking. The SideBar Rails for Yakima OverHaul HD and Outpost HD Truck Bed Racks - Short Bed - 100 lbs - Qty 2 # Y01153 or long bed # Y01154 are the options for accessories if that is what you are seeking.
  view full answer...


• Correct Adarac Aluminum Series Custom Truck Bed Ladder Rack for a 2017 Ram 1500 Quad Cab
• The Adarac Aluminum Series Custom Truck Bed Ladder Rack part # A4001219 is a confirmed fit for a 2017 Ram 1500 (All Cab Types) with 6-1/2' bed. The Adarac Aluminum Series Custom Truck Bed Ladder Rack part # A4001235 is a confirmed fit for a 2017 Ram 1500 (All Cab Types) with 5-1/2' bed. The Adarac Aluminum Series Custom Truck Bed Ladder Rack has integrated channels so it can be used with roof rack accessories that have the channel mounts which is important as the accessories that have...
  view full answer...


• Does Channel Cover of Yakima OutPost HD Overland Truck Bed Rack Need to Be Trimmed
• The channel cover of the Yakima OutPost HD Overland Truck Bed Rack # Y01152-5855 would need to be trimmed to fit the accessories that fit the top channel. You'd pull the channel up, trim it to match where you will mount accessories, and then put in the rest of channel.
  view full answer...


• Will Classic Accessories OverDrive PolyPRO Truck Cover Fit 2014 Chevy Silverado Crew Cab With Camper
• The Classic Accessories OverDrive PolyPRO 1 Truck Cover - SUVs and Pickups part # CA10021 will fit your 2014 Chevy Silverado Crew Cab with camper shell well. The cover is designed for SUVS as well as pick up trucks so the camper on the bed will not be an issue. The covers are designed to fit SUVs and pickups 231" - 262" Long. The shorter Chevy Silverado Crew Cab 1500 Short bed measures a little over 230" long while the longest Chevy Silverado Crew Cab 2500/3500 Long Bed measures 259.1"...
  view full answer...


• Recommended Truck Bed Rack For 2015 Ford F-250 Super Duty with 6-3/4' Bed
• I have a solution for you, but there is not a rail that will allow you to connect the Yakima Outpost truck bed rack to a tonneau cover that is not the Retrax XR tonneau cover. Instead, I recommend looking into the Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars # A70611. This will work with any retractable or soft tonneau cover that is mounted inside the bed rails but will NOT work with folding covers. This attaches to the top of the bed rail on your 2015 Ford F-250...
  view full answer...


• Recommended Ladder Rack and Tonneau Cover for a 2019 Ford F-150 with 5-1/2 Foot Bed
• I have a few different options for you to install both a ladder rack and tonneau cover together on your 2019 Ford F-150 with 5-1/2' bed but you will be limited to ladder racks that install in the stake pockets and tonneau covers that mount inside the bed rails. Good: Adarac Custom Truck Bed Ladder Rack part # A70490 (Utility) Tonno Pro Lo-Roll Soft Tonneau Cover part # TPLR-3045 Better: Adarac Pro Series Custom Truck Bed Ladder Rack part # A4000964 (Utility/Sport) BAKFlip MX4 Hard Tonneau...
  view full answer...


• Can the BedSlide Truck Bed Tray # BE24ER Be Mounted in a Bed with a Spray Liner?
• Yes, the BedSlide Classic Sliding Truck Bed Tray # BE24ER will be able to safely mount over your Rhinolined 2014 Ford 2500 (8-foot bed). All mounting hardware is included with the tray and the install will require drilling a total of 4 holes. There are no other additional tools needed apart from a drill.
  view full answer...


• Rack System for Bed of 2020 Jeep Gladiator With 5 Foot Bed
• There are definitely rack systems that fit the 5' bed of your 2020 Jeep Gladiator, and you have three terrific options from Yakima: - Yakima BedRock HD Truck Bed Cargo Rack w/ 68" HD Crossbars # Y01160-58 - Yakima OutPost HD Mid-Height Truck Rack w/ 60" HD Crossbars # Y01152-57 - Yakima OverHaul HD Adjustable Truck Rack w/ 60" HD Crossbars # Y01151-57 I have added photos for you on a 2020 Gladiator that are directly from Yakima to show you an example of their fit on your truck. The...
  view full answer...


• Will the Brophy Camper Hold Downs # HSBP Fit a 2009 Chevy Silverado
• The Brophy camper tie downs # HSBP are made to fit newer domestic full size trucks like your 2009 Chevy Silverado. It will NOT fit the following: Will not fit step side beds or some double-wall beds Will not fit some Dually beds Will not fit some import trucks Will not fit 2004-2008 Ford F-150 Pickups Even though there is no specific truck fit list, provided that your Silverado is not a step side bed, double wall bed, or a dually it will fit.
  view full answer...


• Recommended Ladder Rack for a 2023 Ford Maverick XLT
• Yes, it can so long as you have a tonneau cover like item # RTX83QR with t-slots. The Yakima OutPost HD Overland Truck Bed Rack item # Y01152-5755 is confirmed to fit your 2023 Ford Maverick XLT. The tonneau cover adapter will slide directly into the accessory slots to provide a sturdy base for the uprights. If you do not have a tonneau cover you can use the Yakima OutPost HD Overland Truck Bed Rack item # Y01152-57. This one just attaches to the sides of your Maverick's bed. If you have...
  view full answer...


• BedRug for 1970 Dodge Sweptline Short Bed Recommendation
• The universal BedRun part # BMX00D is 5-1/2 feet wide and over 8 feet long in length. It would be more than large enough for the bed of your 1970 Dodge Sweptline so it could be trimmed down to size easily.
  view full answer...


• Compatibility of BAK Revolver Roll-Up Tonneau Cover with Stake Pocket Mounted Bed Rails
• The BAK RevoTonneau cover # BAKR15203 is a fit for your 2006 Dodge Ram Pickup with a 6ft bed. With this tonneau cover you should have no interference tubular style bed rails that are currently installed in your truck bed, because the mounting hardware for the RollBAK tonneau will not cover the stake pocket and the the Putco SSR bed rails mount within the stake pocket on the truck. I checked with my contact at BAK and they confirmed that the Revolver can be used with accessories like...
  view full answer...


• Retractable Tonneau Cover And Ladder Rack For 2021 Ram 1500 5-1/2' Bed
• The Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails # PE45CV fits your 2021 Ram 1500 5-1/2' bed without rambox. The built-in Explorer Rails are only compatible with Pace Edwards ladder racks such as the Pace Edwards Utility Rig Rack Truck Bed Ladder Rack # 311-UR3005. This ladder rack is not compatible with bike racks or any T-slot accessories since it doesn't have the T-slot channel. A better option is to use a tonneau cover ladder rack combo kit: Pace Edwards...
  view full answer...


• What Ladder Rack do you Recommend for Kayak Transport on my 2009 Ford F-150 with a 5.5" Bed
• I have a similar solution but the crossbars on the Buyers Products Over-The-Cab Truck Bed Ladder Rack part # 3371501150 are going to be too large at 2" for the accessories you currently have. As are most of the ladder rack systems out there. The Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part # TH500XT will get you up and running. It offers the option to mount t-trac accessories from all manufacturers and the crossbars are only 1 1/2" thick which most crossbar accessories...
  view full answer...


• Recommended Ladder Rack Compatible with Toolbox and Headache Rack on 2008 Ram 2500 with 8 Foot Bed
• Due to your headache rack and toolbox, I recommend you consider the Erickson Truck Bed Ladder Rack - Side Mount - Steel - 250 lbs # EM07708 for a ladder rack on your 2008 Ram 2500. This will not interfere with either accessory. A final option is the Adarac Custom Truck Bed Ladder Rack - 500 lbs # A70566 which would make you work around you accessories for the initial mount to use the stake pockets for securing, but will give you many options of location for your crossbars to work with...
  view full answer...